Redmi K20 - Mobile Display Glass Replacement in Coimbatore |

Display Glass Replacement — Benefits & Why It’s Often the Smart Choice (In-Store at Sanskart Mobiles, RS Puram)

When your phone’s front glass cracks but the picture and touch still work, replacing only the glass can restore a showroom look without paying for a full display set. Here’s why thousands of customers choose **glass-only** with us:

Key Benefits
1) Save Big vs Full Display: You avoid the cost of a new LCD/OLED. Most of your display assembly is reused, so you pay only for the new tempered glass, OCA adhesive and expert labour.
2) Keep Original Screen Quality: Your factory screen usually has better colour, brightness and touch feel than many aftermarket replacements. Glass-only keeps that original panel.
3) Eco-Friendly Repair: Reusing a working panel reduces e‑waste and the environmental footprint of a full module swap.
4) Looks Like New: High-transparency glass + OCA lamination gives a clear, bubble‑free finish with smooth touch and oleophobic feel.
5) Transparent Pricing: Clear ranges based on your model and display type (budget / old LCD / edge‑curved / P‑OLED). No surprises.

Why In‑Store Only (No Doorstep for Glass Jobs)
Glass replacement is a precision workflow that needs calibrated machines: heat separators for safe delamination, alignment jigs, OCA laminators and vacuum defoam chambers to remove micro‑bubbles and Newton rings. This environment is set up inside our RS Puram lab with dust control and ESD safety. That’s how we protect your original panel and deliver consistent optical clarity.

What We Do — Step by Step
• Pre‑checks: Verify display picture, touch, sensors, camera clarity and frame condition.
• Safe Separation: Gently separate broken glass at controlled temperature to protect polarizer and pixels.
• Clean‑up: Remove old adhesive with panel‑safe solutions; no metal scraping on active area.
• OCA Lamination: Align new glass with high‑clarity OCA in a pressure‑controlled laminator.
• Vacuum Defoaming: Eliminate micro‑bubbles for crystal‑clear results.
• Refit & QC: Seat panel into the frame, seal appropriately and test brightness, colours, touch (including edges), proximity and face/front camera.

When Glass‑Only Is Right — and When It Isn’t
Choose glass‑only if the display shows normal picture and touch is fine (no lines, black spots, or touch dead zones). If there’s display damage, a full display replacement may be the better/only option. We’ll inspect and explain both choices before we start.

Time & Pricing (Typical)
• Time estimate: **1–2 hours** per device, depending on model and condition.
• Pricing bands:
– Budget phones (MRP < ₹15,000): **₹800–₹1,500**
– Old LCDs/older models: **₹1,500–₹3,500**
– Edge/Curved displays: **₹3,500–₹6,500**
– P‑OLED (“paper”) displays: **₹3,500+** (model‑wise)

Quality Standards We Follow
• Optical clarity first: High‑transmittance OCA, uniform pressure, and bubble‑free finish.
• Touch & gesture checks: Edge swipes, multi‑touch, gaming taps.
• Sensor alignment: Proximity/ALS and in‑display fingerprint (where applicable).
• Cleanliness: Dust‑controlled benches and ESD‑safe handling.
• Clear warranty on lamination quality and re‑lift; accidental damage not covered.

Visit Us
**Sanskart Mobiles** — No. 165 C, Subramaniyam Road, RS Puram, Coimbatore – 641002.
Phone: 9940011042. In‑store service only for glass replacement.

Model note: We check sensor windows, speaker mesh, and refit tolerances specific to this model family to ensure clear audio and proper proximity performance.

---
FAQs

Q: Is glass replacement safe for my data?
A: Yes. We do not erase or access your data. Still, we recommend backing up as a good habit.

Q: Why is this in-store only and not doorstep?
A: Glass replacement requires heat separators, OCA laminators and vacuum defoam chambers in a dust-controlled lab.

Q: How long will it take?
A: Typical turnaround is 1–2 hours per device, depending on model and panel condition.

Q: Will my touch and colours remain the same?
A: Yes, because we keep your original panel. We test touch, colours and sensors after lamination.

Q: What if my display already has lines or black spots?
A: Glass-only won’t fix panel damage. In that case we’ll suggest a full display replacement and share the options.

Q: What is the warranty?
A: We cover lamination quality (bonding/no lifting) and as-delivered touch/display functionality. Physical damage and liquids are not covered.